28
2c The oven function selector has been moved to 0 (oven
OFF) to cancel the Pyrolysis cycle.
What to do:
1. Wait for the door to unlock. This happens automatically
when the temperature inside the oven has dropped below
300 °C.
2. The time appears and the oven can be used.
3. do.Lo appears during cooking
Oven not working properly.
What to do:
1. Turn the function selector to 0 (oven OFF).
2. Wait for the oven to cool down completely so that the door
opens.
3. Disconnect the oven from the mains.
4. Call the After-Sales Service Centre.
4. Display OFF
Oven not working properly.
What to do:
1. Turn the function selector to 0 (oven OFF).
2. Wait for the oven to cool down completely so that the door
opens.
3. Switch the oven off for a few seconds.
If after this procedure the display is still off:
4. Disconnect the oven from the mains.
5. Call the After-Sales Service Centre. The oven must not be
used.
To Next Page
Loading...
