EasyManua.ls Logo

DeLonghi DEBIGE DEBIGE 2440 E User Manual

DeLonghi DEBIGE DEBIGE 2440 E
36 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
IMPORTANT - PLEASE READ AND FOLLOW
Before beginning, please read these instructions completely and carefully.
Do not remove permanently affixed labels, warnings, or plates from the product. This
may void the warranty.
Please observe all local and national codes and ordinances.
Please ensure that this product is properly grounded.
The installer should leave these instructions with the consumer who should retain
for local inspector's use and for future reference.
The electrical plug should always be accessible.
Installation must conform with local codes or in the absence of codes, the National Fuel
Gas Code ANSIZ223.1 - Iatest edition. Electrical installation must be in accordance with the
National Electrical Code, ANSI/NFPA70 - latest edition and/or local codes. IN CANADA:
Installation must be in accordance with the current CAN/CGA-B149.1 National Gas
Installation Code or CAN/CGA-B149.2, Propane Installation Code and/or local codes.
Electrical installation must be in accordance with the current CSA C22.1 Canadian
Electrical Codes Part 1 and/or local codes.
INSTALLATION IN MANUFACTURED (MOBILE) HOME: The installation must conform with
the Manufactured Home Construction and Safety Standard, Title 24 CFR, Part 3280 [for-
merly the Federal Standard for Mobile Home Construction and Safety, Title 24, HUD (Part
280)] or, when such standard is not applicable, the Standard for Manufactured Home
Installations, ANSI/NCSBCS A225.1, or with local codes where applicable.
INSTALLATION IN RECREATIONAL PARK TRAILERS: The installation must conform with
state or other codes or, in the absence of such codes, with the Standard for Recreational
Park Trailers, ANSI A119.5.
Installation of any gas-fired equipment should be made by a Iicensed plumber. A manual
gas shut-off valve must be installed in the gas supply line ahead of the appliance in the gas
stream for safety and ease of service.
BUILT-IN DUAL FUEL DOUBLE OVEN
for residential use only
DEBIGE 2440 SS model only: This built-in double oven is supplied with a protective film on
steel and aluminium parts. This film must be removed before installing/using the appliance.
USERS OPERATING INSTRUCTIONS
INSTALLATION ADVICE
IMPORTANT - PLEASE READ AND FOLLOW
Models:
DEBIGE 2440 SS
DEBIGE 2440 E
DEBIGE 2440 W
Question and Answer IconNeed help?

Do you have a question about the DeLonghi DEBIGE DEBIGE 2440 E and is the answer not in the manual?

DeLonghi DEBIGE DEBIGE 2440 E Specifications

General IconGeneral
BrandDeLonghi
ModelDEBIGE DEBIGE 2440 E
CategoryOven
LanguageEnglish

Summary

USER INSTRUCTIONS

Important Precautions and Recommendations

Key safety advice and operational guidelines for using the oven.

Important Precautions and Recommendations for Use of Electrical Appliances

Safety and usage advice specifically for the electrical components of the oven.

control panels

CONTROL PANELS (Fig. 1.1 - 1.2)

Overview of the oven's control panel, including diagrams and component labels.

cleaning and maintenance

DO'S AND DO NOT'S

A list of essential usage guidelines and restrictions for the appliance.

FOR YOUR SAFETY

Critical safety information and warnings for the user.

INSTALLATION INSTRUCTIONS

ELECTRICAL GROUNDING INSTRUCTIONS

Explains the mandatory electrical grounding requirements for safety.

installation

INSTALLATION TO THE CABINET

Provides dimensions and instructions for fitting the oven into a cabinet.

gas connection

2. Pressure Regulator:

Information and steps for installing the gas pressure regulator.

PRESSURE REGULATOR INSTALLATION

Detailed steps for mounting and assembling the pressure regulator correctly.

GAS CONNECTION SPECIFICATION

Diagram and specifications for connecting the gas supply to the oven.

5. Leak Testing:

Procedures for performing leak tests on gas connections after installation.

CONVERSION TO LP/PROPANE GAS

Instructions for converting the oven to use LP/Propane gas.

SETTING THE PRESSURE REGULATOR

Steps to adjust the pressure regulator for different gas types.

OPERATIONS TO BE EXECUTED FOR THE REPLACEMENT OF THE INJECTORS OF THE OVEN AND BROIL BURNERS

Guide for replacing gas burner injectors for different gas types.

electrical connection

Recommended ground method

Detailed instructions on the safe and proper grounding of the oven.

Related product manuals