• Ensure the unit is unplugged and empty.
• To take the door off it is necessary to tilt the unit backwards. You should rest the unit on
something solid, e.g. a chair just below the top panel.
• All parts removed must be saved to do the reinstallation of the door.
• Do not lay the unit flat as this may damage the coolant system.
• We recommend that 2 people handle the unit during assembly.
• If you want to have the door swing reversed, we recommend that you contact a
qualified technician. You should only try to reverse the door yourself if you believe that
you are qualified to do so.
reversing the door swing
tools required: Philips style screwdriver / Flat bladed screwdriver / Hexagonal spanner
installing the water tank
• Insert the valve of the water tank into the hole of the water dispenser and push down the
water tank to attach securely with the water dispenser.
• To remove the water tank, hold firmly on the handle and bottom of the water tank then pull
with the handle and push up from the bottom at the same time.
Be careful not to press on the valve.
Valve
15
DFCD60W_X17_IB_2L_RC_190415_grace.indb 15 15/4/2019 11:12 AM
To Next Page
Loading...
