6
ON light
When the STAND-BY button is pressed to start the unit, the ON light will come on automati-
cally. The light will go off again when the unit is switched off.
NOTE: After a power outage, the unit will not switch itself on again automatically. When the
power supply has been reestablished, please press the STAND-BY button to start the unit
again.
TANK Warning light
If the water tank is full, improperly positioned or missing, the tank warning light will start
blinking.
An alarm will sound until the tank is either emptied or correctly positioned into place.
DEFROSTING light
With an ambient temperature of less than 15°C, (59°F) the appliance performs defrosting
cycles.
While the appliance is defrosting, the defrosting light comes on and remains on until defro-
sting is completed.
During the defrosting cycle only the following 4 keys are active:
pump button, stand-by button, temperature button, timer button.
PUMP light (only on some models)
Once the pump button is pressed the pump light will switch on.
If the pump light flashes it means that the pump is not functioning properly.
Display lights
To Next Page
Loading...
Need help?
General
