DeLonghi EC78X - Technical Data and Troubleshooting; Technical Data; Explanation of Lights

11
13. EXPLANATION OF LIGHTS
Lights Operation Explanation of lights
The ON/OFF button is turned on The appliance performs a self-diagnosis
cycle, indicated by sequential ashing of
the lights
When the appliance is turned on Flashing lights: the appliance is heating
up to make coee
Lights on steadily: the appliance is ready
to make coee
The lights ash rapidly: the tank is empty
or the appliance will not make coee. See
the section “2. Filling the water tank”
3. Make sure the lter holder is not attached and position a
recipient under the hot water spout and coee outlet (A5)
(g. 25).
4. Wait for the and lights to come on steadily,
indicating that the appliance is ready for use.
5. Press and hold the button for 10 seconds until the
three buttons ash in sequence.
6. Turn the steam dial to the position.
7. Press the button to start descaling.
8. The descale programme starts and the descaler liquid
comes out of the water spout. The descale programme
removes limescale deposits from inside the appliance by
automatically performing a series of rinses and pausesuntil
the tank is completely empty.
Please note:
During descaling, to clean the coee outlet, close the steam dial
from time to time to deliver small quantities of descaler from
the coee outlet.
9. The appliance stops operation and the orange
light continues to ash, indicating that descaling is still
underway.
10. The appliance is now ready for rinsing through with clean
water. Extract the water tank, empty, rinse under running
water, ll with fresh water up to the MAX level and put
back in the appliance (If used, insert the water softener
lter).
11. Empty the container used to collect the descaler solution
and replace it empty under the hot water spout.
12. Make sure the steam dial is in the position, then
press the button to start rinsing.
Please note:
During rinsing, to clean the coee outlet, close the steam dial
from time to time to deliver small quantities of water from the
coee outlet.
13. When the water tank is empty, the orange light goes out
and descaling is complete.
14. Make sure the steam dial is in the closed position (
○
symbol).
The appliance is ready for use.
Please note!
• If the descaling cycle is not completed correctly (e.g. no
electricity) we recommend repeating the cycle;
• If the water tank has not been lled to the MAX level, at the
end of descaling, the appliance requests a further rinse to
guarantee that the descaler solution has been completely
eliminated from the machine's internal circuits.
Repair of damage to the coee maker caused by limescale is not
covered by the guarantee unless descaling is performed regular-
ly as described above.
12. TECHNICAL DATA
Mains voltage: ........................................ 220-240V~50/60Hz
Absorbed power: ......................................................... 1350 W
Pressure: ....................................................................... 15 bar
Water tank capacity: ............................................................1 l
Size LxHxD..........................................149x305x330 (414)mm
Weight .........................................................................4.04 kg
None of the components or accessories is dish-
washer safe.