To Next PageTo Next Page
Need help?Do you have a question about the DeLonghi GWHD18A1NK3EA and is the answer not in the manual?
General| Brand | DeLonghi |
|---|---|
| Model | GWHD18A1NK3EA |
| Category | Air Conditioner |
| Language | English |
Step-by-step guide for performing flaring work on refrigerant pipes.
Instructions for connecting the electrical cable between indoor and outdoor units.
Steps for connecting the electrical cable to the outdoor unit's control board.
Steps for system preparation and leak testing prior to air purging.
Procedures for system evacuation and completing the air purging process.
Instructions for settling the outdoor unit and evaluating system performance.
Detailed steps for collecting refrigerant in the outdoor unit.
Steps to disassemble the indoor unit's front panel, filter, and electric box cover.
Instructions for disassembling the indoor unit's guide louver, body case, and water tray.
Steps to remove the evaporator and fan motor assembly from the indoor unit.
Instructions for removing the outdoor unit's top cover and front/rear grills.
Steps to disassemble the outdoor unit's front panel and side plate.
Instructions for removing the electric box from the outdoor unit.
Steps for disassembling the axial flow fan and the four-way valve.
Step-by-step instructions for purging air from the refrigeration system.
Procedure for collecting refrigerant into the outdoor unit.
Steps for performing air purging during unit re-installation.
Detailed steps for evacuating the system to remove moisture and air.
Instructions for charging the system with the correct amount of refrigerant.
