How to reset CF on DeLonghi HFX85W20?
The "cf" message indicates that the filter has reached its predefined usage time. Replace the filter and reset the alarm. To reset the CF alarm, quickly insert the plug and then touch and hold the ON/STAND-BY button on the unit for at least 10 seconds until you hear a long beep.
What to do if my DeLonghi HFX85W20 Air Cleaner display shows "Ht" or "It" blinking?
The blinking "Ht" or "It" indicates that the internal temperature is too high or the air intake/outlet is obstructed. Ensure the appliance is positioned correctly, respecting the minimum distances from walls or objects as indicated in the instruction manual. Remove any obstructions. Disconnect the plug from the outlet and let the appliance cool down. After a few minutes, plug it in again.
What to do if a dot is flashing, the DeLonghi Air Cleaner beeps and shuts off?
This indicates that the tip-over switch has been activated. Ensure the DeLonghi Air Cleaner is standing upright on a flat surface.
What does "Fi" mean on my DeLonghi HFX85W20 display?
The "Fi" message indicates that the fan motor is not working. Disconnect the plug from the outlet, wait a few minutes, and then plug the appliance in again.
Key safety precautions to prevent injury or electric shock, misuse, and damage to the appliance.
Warnings regarding potential burns or scalds due to overheating or contact with hot surfaces.
Details on built-in safety features like overheat protection and tip-over switch for safe operation.
Detailed identification and explanation of all appliance and remote control components and their functions.
Instructions for safely connecting the appliance to power and initial installation guidelines.
Initial setup steps and explanation of the automatic air purification function.
How to select and use the heating function, including temperature and fan speed control.
General| Brand | DeLonghi |
|---|---|
| Model | HFX85W20 |
| Category | Air Cleaner |
| Language | English |
To Next Page
