Descaling
If the water in your area is hard, limescale builds up over time.
These deposits may aect correct operation of the appliance.
You are recommended to descale the coee maker every 60 cof-
fee making cycles. To descale, always use special commercially
available descaling products for drip coee makers.
1. Dilute the product in the jug, following the instructions on
the descaler pack;
2. Pour the solution into the water tank;
3. Place the jug on the warming plate;
4. Press the button, percolate the equivalent of one cup
then turn the appliance o;
5. Leave the solution to work for 15 minutes, then repeat
operations 4 and 5.
6. Turn the appliance on and deliver the water until the tank
is completely empty.
7. Rinse by operating the appliance with water only at least 3
times (3 complete tanks of water).
Failure to clean as described above invalidates the guarantee.
Troubleshooting
Problem Probable cause Solution
The coee takes longer to
brew.
The coee maker needs to be descaled. Descale the machine as described in the section DE-
SCALING.
The coee has an acidic ta-
ste.
Insucient rinsing after descaling. Rinse the machine as described in the section DE-
SCALING.
use
en