Need help?Do you have a question about the DeLonghi JE850M and is the answer not in the manual?
General| Type | Juicer |
|---|---|
| Speed Levels | 2 |
| Feed Chute Size | 75 mm |
| Juice Jug Capacity | 1L |
| Material | Plastic and stainless steel |
| Features | Anti-drip system |
Place receptacle on motor housing with spout facing locking bar.
Place filter inside receptacle, aligning bottom with center peg on motor housing.
Attach the top lid onto the receptacle securely.
Lift locking bar until it clicks into lid grooves to secure chute lid.
Ensure locking bar is upright for safety switch activation.
Insert pusher into chute; use it to feed ingredients into the unit.
Place pulp container and juice cup in their correct positions.
Verify that the juicer is completely assembled and ready for operation.
Remove pusher, pulp container, and juice cup before disassembly.
Hold top lid and pull locking bar as illustrated.
Release the locking bar and lower it towards the motor housing.
Carefully remove the top lid from the juicer.
Remove the filter and receptacle from the motor housing.
To Next Page
