To Next PageTo Next PageWhy my DeLonghi La Specialista EC9335M does not grind the coffee?
If your DeLonghi Coffee Maker isn't grinding coffee, it might be due to foreign matter in the coffee mill that cannot be ground. Clean the burrs as described in section "13.8 Cleaning the burrs", making sure you remove all the beans from the bean container (A2) before extracting it. Before putting the burr back, vacuum all residues from the housing (fig. 44).
How to fix no milk froth when making cappuccino with my DeLonghi La Specialista EC9335M Coffee Maker?
If no milk froth is forming when making a cappuccino with your DeLonghi Coffee Maker, consider the following: * The ring (A7) may be in the "FLAT" (NO FROTH) position - push the ring into the "FOAM" position. * The milk may not be cold enough - always use semi-skimmed milk at refrigerator temperature. * The frothing wand (A8) may be dirty - clean the frothing wand as described in section "10. Cleaning the frothing wand after use". * There may be scale in the water circuit - descale as described in section "14. Descaling".
Why is no espresso coffee being delivered from my DeLonghi La Specialista EC9335M Coffee Maker?
There are several reasons why your DeLonghi Coffee Maker might not be delivering espresso: * The water tank (A17) may be empty - fill the tank. * The coffee or steam circuit may be empty - press the button corresponding to the light to fill the circuit. * The filter may be blocked or the perforated filter is missing - clean as described in section "13.4 Cofefe filter cleaning and maintenance" and make sure the perforated filter is put back correctly. * The tank may be inserted incorrectly, preventing the valves on the bottom from opening - press the tank down lightly to open the valves. * There may be scale in the water circuit - descale as described in section "14. Descaling".
What to do if espresso coffee drips from the edges of the portafilter on my DeLonghi La Specialista EC9335M?
If espresso coffee drips from the edges of the portafilter rather than the holes on your DeLonghi Coffee Maker, check the following: * The portafilter may be inserted incorrectly - attach the portafilter correctly and rotate firmly as far as it will go. * The espresso boiler gasket may have lost elasticity or is dirty - have the espresso boiler gasket replaced by Customer Services. * The filter may be clogged, or the perforated filter is missing or dirty - clean as described in section "13.4 Cofefe filter cleaning and maintenance".
Why can't I attach the portafilter to my DeLonghi La Specialista EC9335M?
If the portafilter cannot be attached to your DeLonghi Coffee Maker, it might be because the ground coffee has not been pressed or there is too much. Clean as described in section "4.3 Grind the cofefe directly into the filter".
Why does my DeLonghi La Specialista EC9335M Coffee Maker request a further rinse after descaling?
Your DeLonghi Coffee Maker may request a further rinse after descaling if, during the rinse cycle, the water tank has not been filled to the MAX level. Repeat the rinse cycle from point (8) of section "14. Descaling".
How to fix too light coffee crema from DeLonghi Coffee Maker?
If the coffee crema is too light (delivered from the spout too fast) when using your DeLonghi Coffee Maker, the appliance settings need reviewing. See section "16. How to make perfect cofefe".
Why is the coffee crema too dark from my DeLonghi Coffee Maker?
If the coffee crema is too dark (delivered from the spout too slowly) when using your DeLonghi Coffee Maker, the appliance settings need reviewing. See section "16. How to make perfect cofefe".
What to do if air bubble obstructs delivery in DeLonghi La Specialista EC9335M Coffee Maker?
If you suspect an air bubble is obstructing delivery in your DeLonghi Coffee Maker when the water softener filter (C6) is present, remove the water softener filter and press the button (B6) corresponding to the light (fig. 9). Delivery begins and stops automatically. Reinsert water softener as described in section "11. Activating the water softener filter".
General| Type | Espresso Machine |
|---|---|
| Model | EC9335M |
| Brand | DeLonghi |
| Color | Stainless Steel |
| Material | Stainless Steel |
| Power | 1450 W |
| Bean Hopper Capacity | 300 grams |
| Voltage | 220-240 V |
| Coffee Grounds Container | Yes |
| Steam Wand | Yes |
| Pre-infusion | Yes |
| Milk Frother | Yes |
| Grinder | Integrated |
| Special Features | Dual heating system |
| Included Accessories | Tamper |
| Pump Pressure | 19 bar |
Essential safety precautions to follow when using electrical appliances to prevent injury or damage.
Steps for initial preparation, including washing accessories and filling the water tank.
Instructions for connecting the power cord and initial appliance setup.
Steps to prepare the coffee grinder, including bean container insertion and initial settings.
Guidance on adjusting the coffee grinding level for optimal coffee extraction and taste.
Instructions on how to grind coffee directly into the portafilter and the tamping process.
Guidance on adjusting the amount of coffee ground for the perfect coffee dose.
Instructions on how to select the desired coffee beverage using the mode selector dial.
Diagnoses and solutions for when no espresso coffee is delivered by the appliance.
Addresses issues with blocked or missing coffee filters and how to resolve them.
Provides guidance on descaling the appliance when scale builds up in the water circuit.
Explains causes and solutions for when the portafilter cannot be correctly attached to the appliance.
Solutions for when the coffee grinder fails to operate, including foreign matter issues.
