What to do if lever cannot be closed completely on DèLonghi Coffee Maker?
If the lever of your DèLonghi Coffee Maker cannot be closed completely, empty the capsule container and make sure that no capsule is blocked inside.
Why is no coffee or water coming from my DèLonghi Coffee Maker?
If no coffee or water is coming out of your DèLonghi Coffee Maker, it might be because the water tank is empty. Fill the water tank with potable water. Also, it may be necessary to descale the machine.
How to improve milk froth quality in DèLonghi Coffee Maker?
If the quality of milk froth is not up to standard in your DèLonghi Coffee Maker, ensure that you are using skim or 2% milk at refrigerator temperature (about 32.8°F/4°C). Also, make sure that the froth regulator is clean; if it isn't, clean it in the dishwasher along with the other parts of the milk container.
Why is coffee not hot enough from my DèLonghi Coffee Maker?
If the coffee is not hot enough in your DèLonghi Coffee Maker, preheat the cup. It also may be necessary to descale the machine.
Why does coffee come out very slowly from DèLonghi Coffee Maker?
If coffee comes out very slowly from your DèLonghi Coffee Maker, remember that the flow speed depends on the coffee variety. It also may be necessary to descale the machine.
What to do if 4 recipe buttons blink on DèLonghi Coffee Maker?
If the 4 recipe buttons on your DèLonghi Coffee Maker blink for 5 seconds, fill the water tank.
What to do if capsule area is leaking on DèLonghi Coffee Maker?
If the capsule area of your DèLonghi Coffee Maker is leaking (water in capsule container), position the capsule correctly. If leakages still occur, call the Nespresso Club.
Why is the power save button blinking faster on DèLonghi Coffee Maker?
If the power save button on your DèLonghi Coffee Maker blinks faster, the machine is too hot. Wait until it cools down.
Why is the power save button shining orange on DèLonghi Coffee Maker?
If the power save button on your DèLonghi Coffee Maker shines orange, descale the machine.
Why is the lungo button blinking faster on DèLonghi Coffee Maker?
If the lungo button on your DèLonghi Coffee Maker blinks faster, the machine is in descaling mode.
General| Brand | DeLonghi |
|---|---|
| Model | LATTISSIMA EN660R |
| Type | Espresso Machine |
| Milk Frother | Yes |
| Coffee Pod Compatibility | Nespresso |
| Used capsules container capacity | 10 capsules |
| Color | Red |
| Capsule System | Nespresso |
| Voltage | 220-240 V |
| Pressure | 19 bars |
| Product Type | Espresso Machine |
| Pump Pressure | 19 bars |
Instructions for safe use of short power supply cords.
Information on how to dispose of the appliance and packaging.
Identifies key machine parts like the milk container, buttons, nozzles, and trays.
Details the milk container and its associated rapid cappuccino system.
Explanation of the machine's illuminated buttons and their functions.
How the ECO-MODE optimizes energy consumption for hot water.
How to program the machine's power save mode duration (30 min or 2 hours).
Solutions for common problems like no coffee, slow dispensing, overheating, and leaks.
Steps for removing covers, filling water, attaching nozzle, and plugging in.
Steps for filling water, switching on, and coffee system heating.
Steps for preparing and attaching the milk container to the machine.
How the beverage flows and how to eject used capsules.
Steps for preparing hot water using ECO-MODE.
How to adjust the froth regulator for desired milk froth quantity.
How to select Cappuccino or Latte Macchiato.
Steps for preparing Espresso and Lungo, including capsule insertion and selection.
How to start and cancel beverage preparation.
Information on flow speed and capsule ejection after preparation.
Steps to take when the water tank is empty during preparation.
How to adjust volumes for hot water, Espresso, and Lungo.
How to set and confirm new volume levels for beverages.
How to adjust volumes for Cappuccino and Latte Macchiato.
How to set and confirm new milk volume levels.
Instructions for rinsing the Rapid Cappuccino system pipes after each milk recipe use.
How to rinse the hot water nozzle and pipes using the machine buttons.
Steps for emptying residual water, capsules, and rinsing the drip tray.
Steps to complete the milk system rinsing process.
Instructions for cleaning the drip tray, water tank, side panels, and machine surface.
Steps to empty the water tank and initiate the machine's emptying mode.
How to test water hardness and set the machine accordingly.
How to confirm the selected water hardness settings using the power save button.
How to reset programmed beverage volumes to factory default settings.
How to confirm the factory reset using the power save button.
Steps for preparing the machine and running the descaling solution.
Steps for emptying, rinsing, and refilling the water tank after descaling.
How to rinse the machine after the descaling process is complete.
Instructions for emptying the drip tray and cleaning the machine with a damp cloth.
Electrical, pressure, and dimension specifications of the machine.
Details on the manufacturer's warranty period and coverage.
Information about the optional Nespresso descaling kit.
To Next Page