36
2.1 SETTING THE CLOCK
When the appliance is first connected to the electricity supply or after it has been without power for some time,
two dots (:) appear on the display and a beep is emitted. Press the STOP/CANCEL button (9) and
00 :: 00 00
will
appear on the display.
To set the time, proceed as follows:
CHAPTER 2 - USING THE CONTROLS AND SETTING THE FUNCTIONS
Press the button (2).
(The hour flashes).
1
Set the hour by rotating the
TIME ADJUST knob (8).
(The hour flashes).
2
Press the button (2) again.
(The minutes flash).
3
Set the minutes by rotating the
TIME ADJUST knob (8).
(The minutes flash on the
display 1)
4
Press the button (2) again.
(The set time is displayed).
5
• If you want to change the time set, press the button (2) and repeat the setting procedure as instruc-
ted above.
•You can press the button (2) at any moment, even when the oven is operating, to display the time.
The time will be displayed for 2 seconds.