DeLonghi Nespresso VERTUO LATTISSIMA User Manual

9
10. The buons blink three times rapidly to confirm new seing.
11. The machine is now reprogrammed with the new water hardness seing
and turns automatically in ready mode.
3. Plug the power cord.
4. Make sure that no accessory (milk carafe or descaling pipe) is connected
to the milk carafe connector door.
5. Turn the machine on.
NOTE: Programming the machine according to the actual hardness of the
local water supply warrants its lifetime and it needs to be descaled less oen.
6. Press hot foam buon for three seconds to enter the menu mode.
7. Clean and descale alerts blink together.
8. Press cappuccino buon , the system proposes one out of the five
combinations. If the selection is not done within 15 sec., it exits automat-
ically.
9. Set the hardness level by pressing the corresponding buon in below ta-
ble (within 15 seconds).
Water hardness Buon to press fH dH CaCO3
< 5 < 3 < 50mg/l
> 7 > 4 > 70mg/l
> 13 > 7 > 130mg/l
+
> 25 > 14 > 250mg/l
+
> 38 > 21 > 380mg/l

DeLonghi Nespresso VERTUO LATTISSIMA Specifications

General

Brand	DeLonghi
Model	Nespresso VERTUO LATTISSIMA
Category	Coffee Maker
Language	English