DeLonghi PAC 260 - How to Start Up the Conditioner

11
Plug the appliance into the mains.
Select the “programmed” or “non pro-
grammed” mode (see previous page)
Select the fan speed required pressing
“Fan speed” key C.
Key A ON/OFF
(conditioning) must
be released
Turn the thermostat
to Max. Cold.
Press key A
(ON/OFF).
ON/OFF signal lamp
(conditioning) will
come on.
The appliance comes on.
If not, refer to pag. 14.
To switch off the appliance, press key A
(ON/OFF main switch).
AIR CONDITIONING
How to start up the conditioner
GB 19-05-2003 16:32 Pagina 11