23
This appliance is fitted with a special safety circuit. When the compressor switches off, this circuit
prevents it from switching on again for at least 3 minutes.
HOW TO START UP THE CONDITIONER
(see control panel on the opposite page)
▼
▼
Plug the appliance into the mains.
Select the "programmed" or "non programmed" mode (see
previous page)
Select the fan speed required pressing "Fan speed" key C.
AIR-CONDITIONING
▼
Key A ON/OFF (Condition-
ing) must be released
Turn the thermostat to Max.
Cold.
Press key A (ON/OFF).
ON/OFF signal lamp (con-
ditioning) will come on.
▼
▼
The appliance comes on
If not, refer to pg. 30
To switch off the appliance,
press key A (ON/OFF main switch).
The "Timer On/OFF" pilot lamp only comes on with the programmed mode.
To Next Page
Loading...
