12
How to start up the air conditioner
(see control panel on the previous page)
Plug the appliance into the wall
outlet.
Select the “programmed” or “non pro-
grammed” mode (see previous page)
Select the fan speed required pres-
sing “Fan speed” key C.
Key A ON/OFF must be released
Turn the thermostat to Max. Cold
(COOLEST Pos.)
Press key A (ON/OFF)
ON/OFF signal light (conditioning)
will come on.
The appliance comes on.
If not, refer to page 15.
To switch off the appliance, press key
A (ON/OFF main switch).
AIR CONDITIONING
To Next Page
Loading...
