AIR CONDITIONING MODE (FIG. 16)
Ideal for hot muggy weather when you need to cool and dehu-
midify the room.
Always make sure the water fill door (J) is completely closed
before setting this mode.
To set this mode correctly:
• Press the MODE button (15) a number of times until the air-
conditioning symbol appears.
• Select the target temperature by pressing the or but-
ton (17) until the corresponding value is displayed.
• Select the required fan speed by pressing the FAN button (16).
Four speeds are available:
Maximum speed: to achieve the target tempe-
rature as rapidly as possible.
Medium speed: reduces noise levels but still
maintains a good level of comfort.
Low speed: for silent operation.
AUTOFAN: the appliance automatically selects
the most suitable fan speed in relation to the
temperature set on the digital display.
The most suitable temperature for the room during the summer
varies from 75°F to 81°F (24 to 27°C). You are recommended,
however, not to set a temperature much below the outdoor tem-
perature.
DEHUMIDIFYING MODE (FIG. 17)
Ideal to reduce room humidity (during Spring and Autumn, in
damp rooms, rainy periods, etc.).
In dehumidifying mode, the appliance should be prepared in the
same way as for air conditioning, with the air exhaust hose atta-
ched to enable the moisture to be discharged outside.
To set this mode correctly:
• Press the MODE button (15) a number of times until the dehu-
midifying symbol appears.
In this mode, fan speed is selected automatically by the applian-
ce and cannot be set manually.
9
16
17
To Next Page
Loading...
Need help?
General
