fS0f,
I .'
J \
F'9-
3
and 4
U
Installation
Reverse Removal Procedure and secure outer door
seal with specified adhesive.
HEADER PANEL, WINDSHIELD - Fig. 4
Removal
1.
Open both doors and remove left and right
windshield to door outer seals.
2.
Remove left and right "A" post finishers
(reveal mouldings).
3. Remove windshield header panel.
Installation
Reverse Removal Procedure.
DOOR SEALS AND STRUTS
OUTER DOOR SEAL
Remove outer door
seal.
Installation
1.
With solvent, remove the old adhesive from
door seal mounting surface.
2.
Position and secure new outer door seal with
specified adhesive.
INNER
DOOR SEAL
Removal and Installation
1.
Carefully pull off inner door
seal,
working
around door opening from one end of
seal.
ppw
To Next Page
Loading...
