P:03:02
TP^t
Body
—
Interior
3. With a
firm,
even pressure, position and secure
the air inlet grille to the quarter panel.
4.
With a firm even pressure position and secure
the fixed glass to the quarter panel. Let
poiyurethane adhesive dry for approximately
six hours at a constant room temperature.
5. After poiyurethane is dry, it can be cleaned and
trimmed with a razor blade scraper.
6. Position and secure rear quarter panel.
POWER WINDOW UPPER CHANNEL
(GUIDE)
Installation
1.
Using glass primer 2, apply a bead 12.7mm
(Vi")
wide on both sides of the fixed glass
along the perimeter where the power window
channel is to be installed. Let primer dry
approximately 15 minutes.
2.
Apply poiyurethane adhesive
(16411)
to the
locating edge of the channel. Attach the
channel to
f
he
fixed glass, and let adhesive dry
for
appro-
ately
six hours at a constant room
temperatu •-•.-.
p~\
p"}
f*'::j
i
To Next Page
Loading...
