Fig.
91
Lubricate the cylinder head bolts and hand tighten
them.
Torque tighten the cylinder heads on both banks.
Refit:
oil pressure switch
tensioner oil filter gauzes
both chain tensioners
the fixed shoes
tensioner blades
timing sprocket key and timing sprocket with
timing mark facing outwards. (Fig. 92)
VALVE TIMING LH SIDE
Turn the crankshaft clockwise so that the keyway
centre lies on the centre line of the LH bank of
cylinders. (Fig. 93)
Engine
Fit the timing chain to the LH
sorocket,
with the
dual marking on the chain astride the timing mark
on the sprocket.
Now fit the timing chain over the rear set of teeth
on the timing double sprocket, with the single
marking on the chain in line with the timing mark
on the front of the double
sprocket.
J
Fig. 94)
Fit the camshaft sprocket to the camshaft, taking
care to ensure that the driving pin enters its slot.
Torque tighten the camshaft sprocket bolt while
preventing the crankshaft from turning.
f
••
•:- - :'i
P^
To Next Page
Loading...
