Connection Systems
Delphi Connections Systems Page 7 of 11 01/02/2001
Note: Assembly Instructions are provided for reference only, and are intended for use by skilled assembly technicians.
Personal injury, failure of the system to work as intended, and damage to the product may result from failure to follow the
assembly and disassembly techniques and/or use of tools other than those described. Always follow Assembly
Instructions thoroughly, and please contact Delphi Connection Systems for further assistance.
ASSEMBLY INSTRUCTIONS
MICRO 64 CONNECTOR ASSEMBLY
BUILD CONNECTOR ASSEMBLY TO ASSEMBLY TOOLING HOLDER.
STEP 1:
PROPER ROUTING OF LEADS ON THE BUILD
FIXTURE IS CRITICAL.
STEP 3:
PLUG LEADS TO CONNECTOR ASSEMBLY PER PRINT.
To Next Page
Loading...