Delphi SkyFi2 SA10102 User Manual

23
Advanced Features
To scan all presets:
1. Press the “menu” button. Select
“Search Mode,” then select
“Search by Scanning.” Return to
normal operation by pressing the
“menu” button.
2. Press the “preset/direct” button to
select one of the preset banks.
3. Press the “search” button. SKYFi2
plays each preset channel for 5
seconds, then advances to the
next preset.
4. Press the “search” button again to
stop scanning.
To scan all channels:
1. Press the “menu” button. Select
“Search Mode,” then select
“Search by Scanning.” Return to
normal operation by pressing the
“menu” button.
2. Press the “preset/direct” button
to select direct mode.
3. Press the “search” button. SKYFi2
plays each channel for 5 seconds,
then advances to the next channel.
4. Press the “search” button again to
stop scanning.
Note: When searching, SKYFi2 does not
play any channel that you skipped using
the “Channel Skip/Add” feature. You can
always tune to these channels using the
scroll wheel or by direct entry.

Delphi SkyFi2 SA10102 Specifications

General

Brand	Delphi
Model	SkyFi2 SA10102
Category	Receiver
Language	English