To Next PageTo Next Page
Need help?Do you have a question about the Delta Elektronika SM45-70D and is the answer not in the manual?
General| Output Voltage | 0-45V |
|---|---|
| Output Current | 0-70A |
| Output Power | 3150W |
| Cooling | Fan |
| Protections | Overvoltage, Overtemperature |
Safety Class 1 unit grounding requirements for AC power terminals.
Safety considerations for grounding DC power terminals and sense connections.
Details on constant voltage/current modes and output ranges.
Information on 3-phase, single-phase, and DC/DC converter operation.
External voltage programming, shielded cables, and protection circuits.
Using external interfaces for programming and status reading.
Using Remote ShutDown input to switch off the power circuit.
Thermal switch shutdown for insufficient cooling.
Using Master/Slave feature to form larger units or control multiple units.
Protecting circuits from unwanted high output voltages.
Initial setup steps, connections, and OVP setting.
Connecting and using external voltage sources for programming.
Operating Remote ShutDown and creating an Over Current Trip.
Checks for no output condition: fuses, switches, connections, and potentiometers.
Checking programming mode issues, fuse F600, and voltage errors.
Causes and solutions for unwanted programming offsets due to earth loops.
Issues with parallel operation, fuse F600, and slave connections.
Checking SENSE BLOCK connections and remote sensing for output voltage issues.
Checking OVP setting, overheating, and remote sensing for OVP LED.
Checking overheating, input power, fuses F400/F401, and auxiliary power supply.
Diagnostic steps for serious failures like no output or blown fuses.
Calibrations for max current range, CC monitor, and offset adjustments.
