ENGLISH
84
KEY SIMBOLS LIT BESIDES
THE NUMBERS
FUNCTION
DESCRIPTION
At the end the instrument automa-
tically returns to normal operating
mode.
The unloading of data from the
instrument memory may be
momentarily stopped by pressing
the ENTER key. Press the
ENTER key again to reactivate
data unloading.
When the PROG key is pressed,
data unloading is finally conclu-
ded. After a few seconds the
instrument display returns to nor-
mal mode.
At the end of each block the
report is sent with the maximum,
minimum and mean values calcu-
lated on the block.
During the “DUMP” phase the
instrument does not switch off
automatically, all the key functions
are disabled except the ENTER,
PROG and ON/OFF keys.
Note:
The block is defined at the
moment of storage as a group of
consecutive recordings. The first
interruption of storage ends and
determines the block.
To Next Page
Loading...
