G) To end receiving data from an instrument:
* select TRANSFER from the Hyper Terminal window (1 click).
* select CAPTURE TEXT from the menu (1 click).
* select END from the pull-down sub-menu (1 click).
At this point data reception from the instrument is ended and the file stored in the computer can
be used with any of the software packages used with WINDOWS 98.
H) To quit running the Hyper Terminal:
* select FILE from the Hyper Terminal window (1 click).
* select QUIT from the pull-down menu (1 click).
* YES (1 click) if you want to save the settings of the communication made.
142
ENGLISH
To Next Page
Loading...
