INSTRUCTIONS FOR USE
53
EN
USING YOUR COFFEE MACHINE
The first time you use the machine, or if it has not been used for a long time, the following
must be done:
• Remove the water tank (2) from the machine, wash it
well with water, fill it and put it back in the
machine making sure it is fitted in properly.
• Make sure the lever (5) is down.
• Press the switch ON/OFF (13) and bring it to “ON”;
the LED (14) and the extraction buttons (11 and 12) will blink
green colour, when the equipament starts to pre-heat.
As soon the LED (14) and the extraction (11 and 12) stop
blinking green colour pre-heating is over.
• Do not insert a capsule. Place a cup under the
dispense spout, press the extraction button (12)
and draw a cup of hot water.
This operation is necessary to ensure that the machine
mechanism is correctly primed.
• The machine will then be ready to use.
Carefully check that during these operations the
lever is closed and the water tank is filled.
11
To Next Page
Loading...
Need help?
General
