58
DESCALING
In order to keep your coee machine working eciently you must regularly clean the
mineral deposits (scale) produced by the water. You must bear in mind the water quality
(hard or soft water) in your usage area and how frequently the equipment is used.
You are recommended to carry out equipment descaling every three months, or after
approximately 200 Delta Q capsule extractions.
Follow the safety instructions shown on the Delta Q descaling kit packaging.
Avoid contact of the descaling solution with eyes, skin, machine and surrounding surfaces.
TROUBLESHOOTING
PROBLEM POSSIBLE CAUSE POSSIBLE SOLUTION
• Equipment won’t start. • Not properly plugged
into the power socket.
• Make sure it is properly
plugged in (9).
• The coee is too cold. • The machine is not
ready.
• Wait until the correct
temperature is reached,
shown by the indicator
lights (11, 12 and 14).
• Coee is not being
dispensed or it is being
produced too slowly.
• Not enough water in the
tank.
• Make sure that there
is sucient water in the
tank and, if necessary, fill
the tank (2) with water.
If the machine is not working properly make the simple checks set out below.
If the problem is not among those listed or if it still persists, even if you follow the advice
given, contact our Customer Service and Support 00 800 20 50 20 50 to resolve the
problem of the machine.
To Next Page
Loading...
Need help?
General
