Delta Tau MACRO CPU BOARD 4Ax-602804-xHxx User Manual

^1 HARDWARE REFERENCE MANUAL
^2 MACRO CPU BOARD
^3 HRM for UMAC MACRO & MACRO Stack
^4 4Ax-602804-xHxx
^5 January 29, 2003
Single Source Machine Control Power // Flexibility // Ease of Use
21314 Lassen Street Chatsworth, CA 91311 // Tel. (818) 998-2095 Fax. (818) 998-7807 // www.deltatau.com

Delta Tau MACRO CPU BOARD 4Ax-602804-xHxx Specifications

General

Brand	Delta Tau
Model	MACRO CPU BOARD 4Ax-602804-xHxx
Category	Computer Hardware
Language	English

Summary

INTRODUCTION

3U Product Configurations (General Description)

Overview of UMAC MACRO and MACRO Stack configurations.

MACRO CPU Specifications

Physical Specifications

Details the physical dimensions and weight of the MACRO CPU board.

Electrical Specifications

Details the power requirements of the MACRO CPU board.

3U MACRO-CPU CONFIGURATION

Physical Configurations

Distinguishes between 300-602804-10x (stack) and 3R0-602804-10x (UMAC).

Options A, C, and 10

Describes options for MACRO ring interface (fiber/copper) and firmware.

3U MACRO-CPU JUMPER AND SWITCH CONFIGURATIONS

3U MACRO-CPU Card Layout

Illustrates the physical layout of jumpers and components on the card.

E1-E4 Jumper Settings

Configuration for Watchdog Timer, CPU Mode, Serial Port Baud Rate, and Power Supply Monitor.

E5, E40, JP3, JP4 Jumper Settings

Settings for Signal Detect, Input Select, Loop Back Test, and Future Use jumpers.

JP5-JP6 Jumper Settings

Jumpers for selecting copper communication equalization modes.

SW1: MACRO Slave Node Configure

Configures MACRO station axis and node mapping.

SW2: MACRO Master Number Select

Sets the master IC number for MACRO station response.

Connector Summary

Lists and briefly describes the board's connectors.

MACRO STATION CHARACTER DISPLAY

HARDWARE RE-INITIALIZATION

FIRMWARE UPDATES

3U MACRO-CPU BOARD CONNECTOR PIN-OUTS

J6: (JTHW) Multiplexer Port Connector

Pinout details for the J6 multiplexer port.

J7: (JRS232) Serial Port Connector

Pinout details for the J7 serial port connector.

J14, J17: MACRO COPPER I/O (OPT C)

Pinout details for RJ45 MACRO copper I/O connectors.

P1: UBUS Interface Connector

Pinout details for the P1 UBUS interface connector.

TB1: (JPWR) 4-Pin Terminal Block

Pinout details for the TB1 power terminal block.

U73: MACRO Fiber Optic Connector (OPT A)

Pinout details for the U73 fiber optic connector.

U MACRO-CPU HARDWARE MEMORY MAP

ACCESSORIES