Delta 15938T-DST Series User Manual

1
7/20/10 Rev. A
SILICONE
T
E
F
L
O
N
Icons
®
U
P
C
Model/Modelo/Modèle
538T-DST, 15938T-DST &
15960T-DST
Series/Series/Seria
Para instalación fácil de su llave Delta
usted necesitará:
•LEER TODAS las instrucciones completamente
antes de empezar.
•LEER TODOS los avisos, cuidados, e
información de mantenimiento.
For easy installation of your Delta
faucet you will need:
•ToREAD ALL the instructions completely
before beginning.
•  To  READ ALL warnings, care, and
maintenance information.
SILICONE
T
E
F
L
O
N
Icons
Write purchased model number here.
Escriba aquí el número del modelo comprado.
Inscrivez le numéro de modèle ici.
You may need/Usted puede necesitar/
Articles dont vous pouvez avoir besoin:
Pour installer votre robinet Delta
facilement, vous devez:
•LIRE TOUTES les instructions avant de débuter;
•LIRE TOUS les avertissements ainsi que toutes
les instructions de nettoyage et d’entretien;
SILICONE
SILICONE
®
ASME A112.18.1 / CSA B125.1
ASME A112.18.2 / CSA B125.2
ICC/ANSI A117.1
SINGLE HANDLE LAVATORY TOUCH CENTERSET
FAUCETS - RECOMMENDED FOR USE ON
NON METALLIC SINKS
LLAVES DE AGUA – GRIFOS – MONOMANDO
MONOBLOC PARA LAVAMANOS – SE RECOMIENDA
PARA EL USO EN LAVAMANOS NO METÁLICOS
ROBINETS CENTERSET TACTILES À UNE MANETTE
POUR LAVABO - RECOMMANDÉS POUR UNE
UTILISATION SUR DES LAVABOS NON MÉTALLIQUES
1/8"
64598
64598
SILICONE
T
E
F
L
O
N

Delta 15938T-DST Series Specifications

General

Brand	Delta
Model	15938T-DST Series
Category	Kitchen & Bath Fixtures
Language	English

Summary

Product Information and Preparation

Product Introduction

Identifies the Delta faucet model and its intended use.

Installation Requirements

Lists essential items and reading materials needed for installation.

Cleaning, Care, and Warranty

Cleaning and Care Instructions

Guidance on how to maintain the product's finish and appearance.

Limited Warranty Information

Details the warranty terms, coverage, and exclusions for Delta faucets.

Installation Procedures

Three Hole Mount Installation

Instructions for installing the faucet in a sink with three mounting holes.

Single Hole Mount Installation

Instructions for installing the faucet in a sink with a single mounting hole.

Solenoid Installation

Step-by-step guide for installing the solenoid assembly for the faucet.

Wire Connections

Detailed steps for connecting electrical wires for faucet operation.

Water Line Connections

Instructions for connecting the hot and cold water supply lines to the faucet.

Custom Fit Connections

Guidance on custom fitting PEX supply tubing for optimal installation.

Plastic Sleeve Installation Instructions

Specific instructions for installing plastic sleeves for custom tubing connections.

Pop-Up Drain Assembly Installation

Instructions for installing the automatic pop-up drain assembly.

Operation and Troubleshooting

Potential Problems and Remedies

Lists common installation issues and their corresponding solutions.

Cleaning the Screen

Steps to clean the screen in the solenoid valve for proper water flow.

General Faucet Maintenance

General maintenance procedures and troubleshooting for faucet issues.

Low Battery Indication

Explains LED indicators for battery status and low battery warnings.

Setting the Handle Limit Stop

How to adjust the handle to limit hot water temperature to prevent scalding.

Advanced Faucet Maintenance

Further maintenance procedures and troubleshooting for faucet issues.