Delta 7945 - Full Size Bed Conversion; Full Size Bed Conversion: Step 1 - Frame Prep

14
You have the option to convert the crib to a Full Size Bed. Simply follow steps in reverse order to
disassemble the crib. Remove the Rear Legs from the Left Crib End and Right Crib End with the M4
Allen Wrench as shown. To create the footboard, assemble the Left Front Leg (Part G), Right Front Leg
(Part H), Stabilizer Bar (Part K), Front Side (Part J) and Top Rail (Part A) using (4) M4x30mm Metal Pins
(Part U), (4) M6x60mm Bolts (Part R), (2) M6x40mm Bolts (Part S) and (4) M6x17mm Barrel Nuts
(Part V). See Section 1 Steps 5 for more detail.
Store all parts and hardware in a safe place.
N
N
N
A
V
R
S
R
S
U
U
U
J
K
G
H
M4 Allen Wrench Supplied
Step 1
Section 3: Full Size Bed Conversion
Parts and tools required to complete step.
N