To Next PageTo Next Page
Need help?Do you have a question about the Delta 95B932 and is the answer not in the manual?
General| Brand | Delta |
|---|---|
| Model | 95B932 |
| Category | Kitchen & Bath Fixtures |
| Language | English |
Define the desired sink edge exposure (positive or flush) for the countertop cut-out.
Place the cut-out template on the countertop ensuring clearance for backsplash and faucet.
Trace the template onto the countertop using a pencil for the cutout guide.
Carefully cut the opening in the countertop following the traced line using an appropriate saw.
Determine bracket location and align sink with countertop, ensuring holes are 1/2" from sink edge.
Drill a 3/8" diameter, 1/2" deep hole in the countertop for mounting.
Insert anchors into the drilled holes and lightly tap with a hammer until flush.
Apply sealant around the sink rim, align, and press firmly into the countertop cutout.
Attach mounting hardware to the sink bowl and allow sealant to set for 30-60 minutes.
Connect drain, trap, and water supply lines. Check for leaks and ensure drain kit compliance.
Take apart the strainer components before installation.
Insert the metal strainer into the drain hole with gaskets and secure from underneath.
Use the screw to tighten the metal strainer and main body into place.
Insert the strainer cover to seal the water.
Warranty covers defects in material and workmanship for the original consumer purchaser.
Warranty for recertified sinks covers defects for ten years for consumers, one year for commercial.
Delta Faucet Company will repair or replace defective products free of charge.
Excludes products from unauthorized sellers, labor charges, and damage from misuse or improper installation.
Contact Delta Faucet Company by phone or mail with model number and proof of purchase.
Use of abrasive cleaners or pads will void the product warranty.
Implied warranties are limited to the statutory period or warranty duration, whichever is shorter.
Excludes liability for special, incidental, or consequential damages and specific types of product damage.
Warranty provides specific legal rights that may vary by state or province.
