Need help?Do you have a question about the Delta AC Wallbox and is the answer not in the manual?
General| Input Voltage | 230V AC |
|---|---|
| Output Power | Up to 22 kW |
| Charging Interface | Type 2 |
| Operating Temperature | -30°C to +50°C |
| Mounting | Wall-mounted |
| Output Current | 32A |
| Connectivity | Wi-Fi, Ethernet |
| Protection | Overcurrent, Overvoltage, Short Circuit |
| Enclosure Rating | IP55 |
| Charging Cable Length | 5m |
| Communication | OCPP 1.6 |
Provides essential safety precautions and warnings before commencing installation.
Details requirements for proper grounding of the AC Charger system.
Lists necessary tools and components for AC Charger installation, both vendor-supplied and installer-supplied.
Instructions for drilling wall holes for the mounting bracket and optional cable hanger, including height requirements.
Guidance on attaching the mounting bracket and cable hanger using appropriate hardware for different wall types.
Details on connecting electrical wiring to the EVSE, specifying conduit, wire gauge, and torque for terminals.
Procedure for aligning the AC charger's screw holes with the mounting bracket.
Steps for securing the charger unit to the installed support bracket using screws.
Instructions for securing the charger plug and placing its cable on the designated hanger.
To Next Page
