How to troubleshoot a Delta Battery Charger when the indicator does not light up?
If the indicator on your Delta Battery Charger doesn't light up, first ensure the power input is correctly connected and within the unit's operating range. If it still doesn't work, try power cycling the product.
What to do if the indicator light on my Delta AC MAX is red?
If the indicator on your Delta Battery Charger illuminates in red, it might indicate a critical error such as a hardware fault. Try unplugging the charging connector and power cycling the product.
Why is the indicator flashing red on my Delta Battery Charger while charging?
If the indicator on your Delta Battery Charger starts flashing red during charging, wait up to 10 seconds to see if the temporary error resolves itself. If it doesn't, try unplugging the charging connector and power cycling the charger.
What to do if the indicator doesn't flash after plugging the charging connector into my Delta AC MAX Battery Charger?
If the indicator on your Delta Battery Charger doesn't flash after plugging in the charging connector, check that the charging connector is fully inserted into the EV. Also, check if the EV battery is already fully charged.
General| Brand | Delta |
|---|---|
| Model | AC MAX |
| Category | Battery Charger |
| Language | English |
Provides critical safety guidelines before installation, commissioning, and operation.
Instructions on how to configure the EVSE's dip switches for various settings.
Describes configuring dip switches 4-6 to set the maximum output current ratings.
Provides instructions for connecting the input power wires to the terminal block.
Illustrates wiring diagrams for single-phase and three-phase connections.
How to access the EVSE's web configuration interface.
Configuration settings for integrating and operating with an OCPP system.
Details how to configure Ethernet communication for OCPP.
Steps for configuring Wi-Fi communication for OCPP.
Instructions for configuring cellular communication for OCPP.
Steps for updating the EVSE firmware to the latest version.
Process for resetting the EVSE to its default factory settings.
Step-by-step guide on how to initiate a charging session.
Instructions on how to safely end a charging session.
Lists fault events indicated by LED flashes and their corresponding actions.
To Next Page
