Delta AC MAX User Manual

v1.0.0
23
3.3 Configuration
Operating without OCPP system
User can configure the below information for EVSE:
Item
Description
Authentication
Choose the authorized mode for user authentication. Default will be
“RFID mode”.
Maximum charging time
Choose the maximum charging time for each charging session.
Default will be “No limit”.
Maximum charging current
Choose the maximum charging current per phase. It is limited by the
dip switch setting.
System time
Choose the system time “YYYY/MM/DD- HH:MM:SS”
Wifi AP mode
When active, EVSE is capable of commissioning through wifi
connection directly.
Operating with OCPP system
User can configure the below information for EVSE:
Item
Description
Charge Box ID
The Box ID shall be consistent with the one in your OCPP system.
Server URL
Enter the URL to connect to your OCPP system
OCPP version
Choose OCPP version. Default will be “OCPP 1.6J”.
Offline policy
Choose the behavior when disconnection. Default will be “Local
authentication”.
Maximum charging current
Choose the maximum charging current per phase. It is limited by the
dip switch setting.
System time
Choose the system time “YYYY/MM/DD- HH:MM:SS”

Delta AC MAX Specifications

General

Brand	Delta
Model	AC MAX
Category	Battery Charger
Language	English