and CANopen Communication Timeout.
You can define the times of trying to connect after a timeout occurs in
Auto Retry connection after Disconnected.
All three AS-FCOPM working modes can set the
AS-FCOPM Bit Rate
.
Communication data sampling position:
It is suggested to select
Auto
, but if the communication with the slave
is unstable, you can select the data sampling position in percentage.
When CANopen DS301 protocol is selected from the AS-FCOPM working mode box, you can set
DS301 PDO Data Exchanged: Start after power-on
or
Start after CPU running
Insert AS-FPFN02, AS-FOPC02, AS-FEN02, or AS-FECAT by clicking the function card slot 2 and selecting the
inserted function card, as the image shown below.
Send Quote Requests to info@automatedpt.com
Call +1(800)985-6929 To Order or Order Online At Deltaacdrives.com
Send Quote Requests to info@automatedpt.com
Call +1(800)985-6929 To Order or Order Online At Deltaacdrives.com
To Next Page
Loading...