To Next PageTo Next PageWhat if the input priority in the EDS file is mismatched on Delta Controller?
If the input priority in the EDS file is mismatched, check if the product information matches the EDS file. If not, reload the EDS file. If the issue persists, contact the device vendor for the correct EDS file.
What to do if I experience I/O connection timeout with Delta Controller?
If you're experiencing an I/O connection timeout with your Delta Controller, begin by verifying the network connection status. Next, check that the module is functioning as it should. You might also increase the RPI value.
What to do if Delta Controller shows out of connections?
If your Delta Controller is out of connections, check if the number of connections exceeds the limit. If it does, reduce the number of product connections.
What causes ownership conflict in Delta Controller and how to resolve it?
If you encounter an ownership conflict with your Delta Controller, check the scanner owner. You can also reconfigure the invalid scanner or change the connection to multicast.
Why does Delta Controller show unconnected request timeout?
If you're facing an unconnected request timeout with your Delta Controller, this indicates no response from the adapter. Check that the power and network connection for the adapter are working correctly.
What to do if the fixed / variable input flag in the EDS file is mismatched in Delta Controller?
If the fixed / variable input flag in the EDS file is mismatched, check if the product information matches the EDS file. If not, reload the EDS file. If the issue persists, contact the device vendor for the correct EDS file.
What if the direction parameters in the EDS file are mismatched for Delta Controller?
If the direction parameters in the EDS file are mismatched, check if the product information matches the EDS file. If not, reload the EDS file. If the issue persists, contact the device vendor for the correct EDS file.
What to do if the fixed / variable output flag in the EDS file is mismatched on Delta Controller?
If the fixed / variable output flag in the EDS file is mismatched, check if the product information matches the EDS file. If not, reload the EDS file. If the issue persists, contact the device vendor for the correct EDS file.
What to do if Adapter RPI is not supported on Delta Controller?
If the adapter RPI is not supported by your Delta Controller, check the RPI for the adapter.
How to resolve the 'Invalid target to originator' error on Delta Controller?
If you are getting an invalid target to originator error with the Delta Controller, check the output size in the connection parameters.
General| Series | AS Series |
|---|---|
| Power Supply | 24VDC |
| Cooling Method | Natural convection |
| Programming Language | Function Block Diagram (FBD) |
| Communication Interface | Ethernet, RS-232, RS-485 |
| Output Voltage | 24V DC |
| Output Current | 2A |
| Operating Temperature | 55°C |
| Storage Temperature | 70°C |
| Protection Features | Overvoltage |
| Certifications | CE, UL |
Introduces AS Series PLC functions, devices, module tables, instructions, and specifications.
Details the key characteristics of the AS series CPU module, including high efficiency and program capacity.
Lists general specifications for AS Series modules, including environmental and safety requirements.
Covers functional and electrical specifications for various AS Series CPU modules.
Details specifications for digital input/output modules, including electrical specifications for inputs and outputs.
Lists specifications for analog input/output modules, covering general specs and profiles.
Provides general specifications, profiles, and dimensions for temperature measurement modules.
Details general specifications and profiles for positioning modules.
Lists general specifications, profiles, and terminals for counter modules.
Provides general specifications and profiles for network modules.
Details general specifications, profiles, and dimensions for load cell modules.
Covers general specifications and profiles for various extension cards.
Lists general specifications and profiles for power supply modules.
Provides instructions for installing and uninstalling the ISPSoft software.
Offers steps for installing and uninstalling the COMMGR software.
Introduces the AS Series hardware framework and its components.
Provides essential notes and considerations for installing AS Series hardware.
Details the process of installing modules, terminal blocks, and extension cards.
Explains how to connect power cables, including AC power and grounding.
Provides detailed wiring diagrams and specifications for various AS Series CPU modules.
Illustrates wiring for various digital input/output modules.
Details wiring for digital input and output terminals.
Shows wiring diagrams for analog input/output modules.
Provides wiring diagrams for temperature measurement modules.
Illustrates wiring for positioning and counter modules.
Covers wiring for various network modules like AS00SCM and AS01DNET.
Illustrates wiring for different function cards like AS-F232 and AS-FCOPM.
Introduces devices, including device table, I/O storage structure, and device type relations.
Explains device functions such as values, constants, input/output relays, timers, and counters.
Details how module addresses are automatically assigned by HWCONFIG.
Explains how to assign addresses to remote modules using HWCONFIG.
Provides a simple example of creating a traditional ladder diagram in ISPSoft.
Explains how to configure hardware settings within an ISPSoft project.
Covers the steps for creating a program, including adding ladder diagrams and editing.
Explains how to test and debug a program using ISPSoft, including connection and monitoring.
Covers essential steps before using a memory card, including formatting.
Details the procedure for installing and removing memory cards from CPU modules.
Explains how to back up a project, including PLC CPU data and ISPSoft project files.
Details the process of restoring a project from a backup file.
Introduces HWCONFIG as a tool for configuring AS Series modules, downloading parameters, and diagnosing.
Covers setting various parameters for an AS Series CPU module.
Covers EtherNet/IP device installation and network cable configuration.
Lists Ethernet and EtherNet/IP specifications, including protocols and port details.
Introduces software for EtherNet/IP setup, including HWCONFIG and EIP Builder.
Provides an overview of error codes and troubleshooting for AS Series EtherNet/IP issues.
Provides an overview of using Ethernet/IP with Delta PLC and third-party software.
Introduces CANopen networks, their usage, and compatibility with AS Series PLCs.
Covers AS-FCOPM dimensions, installation on AS300 PLC, and network topology.
Introduces the CANopen protocol, its OSI model relation, and the object dictionary.
Provides an overview of CANopen network troubleshooting and node state display.
Describes the operational procedure of the CPU module, including initialization, diagnosis, and I/O refreshing.
Covers the two operating modes: STOP and RUN, and their effects on program execution.
Covers basic troubleshooting steps, error states, SOP, and system log viewing.
Lists error codes and LED indicators for CPU modules when they are ON or blinking.
Provides troubleshooting steps for various I/O modules like analog and temperature modules.
Lists error codes and LED indicators for modules, categorized by type.
Explains the function of Data Tracer for real-time collection of variable data for trend analysis.
Covers backing up and restoring Delta device parameters using ISPSoft and EIP Builder.
Guides on installing the USB driver for AS Series CPU module on Windows XP.
Details the steps for installing the USB driver for AS Series CPU module on Windows 7.
Explains how to disable driver signature enforcement in Windows 8 to install the USB driver.
Guides on disabling driver signature enforcement in Windows 10 for USB driver installation.
Provides notes and recommendations for using USB communication with AS Series PLC.
Lists standard Modbus device addresses applicable to AS series PLC.
Lists applicable EMC standards for an AS series system, covering EMI and EMS.
Details EMI and EMS standards applicable to AS Series systems.
Provides instructions for installing AS Series PLC in a control box to meet EMC standards.
Lists important precautions to observe before performing maintenance and inspection.
Describes daily inspection procedures and required tools for AS Series systems.
Outlines periodic inspection procedures based on operating environment.
