Delta AS Series - Creating a Project

6.3 Creating a Project
After you start ISPSoft, on the
File
menu, point to
New
, and then click
New
to create a new project. You can
also create a new project by clicking on the toolbar after you start ISPSoft.
In the
Create a New Project
dialog box, type a project name in the
Project Name
box and a path in the
Drive/Path
box, select a PLC in the
PLC Type
drop-down list box, and then click
OK
. The PLC in this
example is the AS332T.
After you create the project, a project management area appears at the left side of the main screen. The
relation between the items listed in the project management area is represented by a hierarchical tree
structure. If the project management area does not appear, on the
View
menu, click
Workspace
, or click
on the toolbar.
Send Quote Requests to info@automatedpt.com
Call +1(800)985-6929 To Order or Order Online At Deltaacdrives.com
Send Quote Requests to info@automatedpt.com
Call +1(800)985-6929 To Order or Order Online At Deltaacdrives.com