Delta AS Series - System Settings - Device Range Setting

8.2.3 System Settings – Device Range Setting
The parameters on
Device Range Setting
table are shown in the following window.
Click to open the parameter dialog box to set the start and end address. In the dialog box, click
Default
to
restore the setting to the default values; click
Clear
to clear the set values; click
OK
to save the values and close the
dialog box; click
Cancel
to discard the setting and close the dialog box.
Send Quote Requests to info@automatedpt.com
Call +1(800)985-6929 To Order or Order Online At Deltaacdrives.com
Send Quote Requests to info@automatedpt.com
Call +1(800)985-6929 To Order or Order Online At Deltaacdrives.com