9.11.6 Configurations
9.11.6.1
Save Configuration Page
You can save the configurations and download the parameters to your device here.
Item Description
“Save”
Download the saved parameters to the device.
PLC Status
LED of PLC running status; read only
Green light: RUN
LED Not Lit: STOP
“Run” / “Stop”
Click “RUN” to set the running status to RUN
Click “Stop” to set the running status to STOP
Note: The data monitor table must be downloaded to the device. If not, once you log out, close the page or restart the
PLC, all the temporary saved parameters will be cleared.
Send Quote Requests to info@automatedpt.com
Call +1(800)985-6929 To Order or Order Online At Deltaacdrives.com
Send Quote Requests to info@automatedpt.com
Call +1(800)985-6929 To Order or Order Online At Deltaacdrives.com
To Next Page
Loading...
