Delta AS Series - Set up the IP Address

9.4.2 Set up the IP Address
This section provides an overview on how to set up IP address for AS Series modules. Set up the IP address before
configuring the EIP related parameters or data exchange settings. For the editing on the network parameters, you need
to go to HWCONFIG -> Edit Area -> General -> Ethernet Port Basic Setting.
9.4.2.1 IP Address Types
The AS Series supports 3 types of IP addressing, BOOTP, DHCP and static IP address.
Type of IP Address Definition
BOOTP
Uses the TCP/IP Bootstrap Protocol (BOOTP) to set up the IP address, netmask and
gateway. A BOOTP server may require some configuration. The BOOTP protocol is
designed for a network in which each host has a permanent network connection.
DHCP
Uses the Dynamic Host Configuration Protocol (DHCP) to automatically obtain IP address,
netmask, gateway, main computer name and the WINS server.
Static IP You manually set the IP address, netmask and gateway.
Send Quote Requests to info@automatedpt.com
Call +1(800)985-6929 To Order or Order Online At Deltaacdrives.com
Send Quote Requests to info@automatedpt.com
Call +1(800)985-6929 To Order or Order Online At Deltaacdrives.com