Delta AS Series - Starting Addresses for Load Cell Modules

• AS04SIL-A: when selecting the COM communication mode, its communication status and communication
method: the input device range occupies 20 data registers.
5.4.6 Starting Addresses for Load Cell Modules
HWCONFIG automatically assigns consecutive input and output data registers starting from D28000 to a load
cell module in ISPSoft according to the number of registers defined for the load cell module.
• 02LC: The input device range occupies 7 data registers and the output device range occupies 13 data
registers.
Send Quote Requests to info@automatedpt.com
Call +1(800)985-6929 To Order or Order Online At Deltaacdrives.com
Send Quote Requests to info@automatedpt.com
Call +1(800)985-6929 To Order or Order Online At Deltaacdrives.com