Delta AS Series - AS200 Input;Output Terminals

2.2.5 AS200 Input/Output Terminals
 Analog Input
Two analog signal input channels:
Item Voltage Input Current input
Analog Signal
-10 to +10 V
-20 to 20 mA
4 to 20mA (for FW V1.08 or later)
Resolution
12-bit 11-bit
Input impedance
≧1 MΩ
250 Ω
Conversion time
3 ms / CH
Analog to digital
conversion range
-2000 to 2000
-1000 to 1000 (-20 to 20 mA)
0 to 1000 (4 to 20mA)
Digital value
output
SR168 (CH1) SR169 (CH2)
You can use the program to read the values in SR to obtain the corresponding A/D conversion value for the
channel.
 Analog Output
Two analog signal output channels:
Item Voltage output Current output
Analog Signal
-10 to +10 V
0 to 20 mA
Resolution
12-bit
12-bit
Impedance
allowance
≥1 k Ω ≤500 Ω
Conversion time
2ms / CH
Analog to digital
conversion range
-2000 to 2000
0 to 4000
Digital value
output
SR172 (CH1) SR173 (CH2)
You can use the instruction MOV to move the value to the SR to obtain the corresponding voltage output
value.
Send Quote Requests to info@automatedpt.com
Call +1(800)985-6929 To Order or Order Online At Deltaacdrives.com
Send Quote Requests to info@automatedpt.com
Call +1(800)985-6929 To Order or Order Online At Deltaacdrives.com