Delta AS Series - Network Configuration

9.11.3 Network configuration
You can set network related configurations here.
9.11.3.1 Account management
You can set 3 kinds of access types for up to 8 user accounts.
Item Description
User ID
To name your user ID, you can use up to 16 characters from the
following characters, A through Z (case-insensitive ), 0 through 9,
_ (underscore) , (comma) and . (dot) .
 The first default user ID is “Admin” (read only).
Password
To name your password, you can use up to 16 characters from the
following characters, A through Z (case-insensitive ), 0 through 9,
_ (underscore) , (comma) and . (dot) .
 No password for the default user ID “Admin” (read only),
you can set up the password later.
Access type
Administrator: You can set up all parameters and have permission
to edit the password and permission.
Write/Read: You can open the data monitor pages and the
diagnostic page. You can also edit the parameters.
Read: You can open the data monitor pages and the diagnostic
page. But you cannot edit parameters.
 Default user is “Administrator”.
“Delete”
Use “Delete” to clear the user ID and password.
“Apply”
Use “Apply” to save the settings.
Send Quote Requests to info@automatedpt.com
Call +1(800)985-6929 To Order or Order Online At Deltaacdrives.com
Send Quote Requests to info@automatedpt.com
Call +1(800)985-6929 To Order or Order Online At Deltaacdrives.com