To Next PageTo Next Page
Need help?Do you have a question about the Delta AS320T-B and is the answer not in the manual?
General| Series | AS Series |
|---|---|
| Model | AS320T-B |
| Brand | Delta |
| Points | 32 |
| Power Supply | 24V DC |
| Input Voltage | 24V DC |
| Output Voltage | 24V DC |
| Output Current | 0.5A per point |
| Safety Standards | CE, UL |
| Type | Programmable Logic Controller |
| Communication Ports | RS-485 |
| Operating Temperature | 0°C to 55°C (32°F to 131°F) |
| Storage Temperature | -25°C to 70°C (-13°F to 158°F) |
| Cooling Method | Natural convection |
| Protection Features | Overvoltage |
General specifications including operating temperature, humidity, and environmental resistance.
Detailed specifications for AS Series CPU modules.
Specifications for digital input and output modules.
Specifications for analog input and output modules.
Specifications for temperature measurement modules.
Specifications for positioning modules.
Specifications for counter modules.
Specifications for network modules.
Specifications for load cell modules.
Specifications for extension cards.
Specifications for power supply modules.
Guide to installing and uninstalling ISPSoft software.
Guide to installing and uninstalling COMMGR software.
Overview of the AS Series hardware framework and components.
Detailed steps for installing modules and components.
General guidelines and notes for wiring modules and components.
Instructions on how to connect power cables to the modules.
Wiring diagrams and instructions for various AS Series CPU modules.
Wiring diagrams and instructions for digital input/output modules.
Terminal assignments for digital input and output modules.
Wiring diagrams and instructions for analog input/output modules.
Wiring diagrams and instructions for temperature measurement modules.
Wiring diagrams for positioning and counter modules.
Wiring details for load cell modules.
Wiring diagrams for network modules.
Wiring instructions for various function cards.
Step-by-step guide for creating a project in ISPSoft.
Steps to configure hardware within the project.
Detailed steps for creating a program, including editing contacts and coils.
Procedures for testing and debugging the created program.
Instructions on how to install and remove memory cards from the CPU module.
Steps for backing up a project using the CARD Utility.
Steps for restoring a project from a backup file.
Introduction to the HWCONFIG tool for configuring AS Series modules.
Configuring various system settings and parameters for the AS Series CPU module.
Configuring data exchange settings for communication protocols.
Steps for installing EtherNet/IP devices and network cables.
Using EIP Builder software for network configuration and device monitoring.
Specifications for Ethernet and EtherNet/IP interfaces and protocols.
Using HWCONFIG and ISPSoft for EtherNet/IP setup and configuration.
Procedures for setting up IP addresses using Static, BOOTP, or DHCP methods.
Steps to add new devices to the network either by scanning or manually.
Creating and configuring data exchange tables for implicit messaging.
Using EtherNet/IP tags for data transfer and communication.
Performing diagnostic checks on EtherNet/IP connection and data exchange status.
Common error codes and troubleshooting steps for EtherNet/IP issues.
Detailed error codes and their corresponding solutions.
Demonstrations of software operations for EtherNet/IP.
Troubleshooting common issues in CANopen networks.
Troubleshooting specific errors related to the CPU module and its LED indicators.
Troubleshooting common issues with various types of I/O modules.
Lists error codes and corresponding LED indicator statuses for CPU modules.
Steps to backup and restore Delta device parameters.
Important precautions to observe before performing maintenance and inspection.
