Delta AS218TX-A User Manual

7037
The device checksum for the
communication serial port of the
Ethernet is incorrect.
1. Check the communication setting in the master
and the slave.
2. Check the communication cable.
- H
7041
The device communication function
code in the USB is incorrect.
1. Check the communication setting in the master
and the slave.
2. Check the communication cable.
- H
7042
The device communication address
used in the USB is incorrect.
1. Check the communication setting in the master
and the slave.
2. Check the communication cable.
- H
7043
The device used in the USB exceeds
the device range.
1. Check the communication setting in the master
and the slave.
2. Check the communication cable.
- H
7044
The device length of the
communication
data in the USB exceeds the limit.
1. Check the communication setting in the master
and the slave.
2. Check the communication cable.
- H
7047
The device checksum for the
communication serial port of the USB is
incorrect.
1. Check the communication setting in the master
and the slave.
2. Check the communication cable.
- H
70B1
The device communication function
code in function card 1 is incorrect.
1. Check the communication setting in the master
and the slave.
2. Check the communication cable.
- H
70B2
The device communication address
used in function card 1 is incorrect.
1. Check the communication setting in the master
and the slave.
2. Check the communication cable.
- H
70B3
The device used in the function card 1
exceeds the device range.
1. Check the communication setting in the master
and the slave.
2. Check the communication cable.
- H
70B4
The device length of the
communication
data in function card 1 exceeds the
limit.
1. Check the communication setting in the master
and the slave.
2. Check the communication cable.
- H
70B7
The device checksum for the
communication serial port of function
card 1 is incorrect.
1. Check the communication setting in the master
and the slave.
2. Check the communication cable.
- H
70C1
The device communication function
code in function card 2 is incorrect.
1. Check the communication setting in the master
and the slave.
2. Check the communication cable.
- H
70C2
The device communication address
used in function card 2 is incorrect.
1. Check the communication setting in the master
and the slave.
2. Check the communication cable.
- H
70C3
The device used in function card 2
exceeds the device range.
1. Check the communication setting in the master
and the slave.
2. Check the communication cable.
- H
70C4
The device length of the
communication
data in function card 2 exceeds the
limit.
1. Check the communication setting in the master
and the slave.
2. Check the communication cable.
- H
70C7
The device checksum for the
communication serial port of function
card 2 is incorrect.
1. Check the communication setting in the master
and the slave.
2. Check the communication cable.
- H
7203 Invalid communication function code
1. Refer to the function codes defined by the
communication protocols.
2. Check if the product firmware and the software
- H
Send Quote Requests to info@automatedpt.com
Call +1(800)985-6929 To Order or Order Online At Deltaacdrives.com
Send Quote Requests to info@automatedpt.com
Call +1(800)985-6929 To Order or Order Online At Deltaacdrives.com

Delta AS218TX-A Specifications

General

Brand	Delta
Model	AS218TX-A
Category	Control Unit
Language	English