Non-synchronous mode
X
X
PLCScancycle PLCScancycle PLCScancycle PLCScancycle PLCScancycle
Explanation:
: After PLC scan time ends, PLC CPU refreshes to update the task of sending PDO.
: If the data in PDO changes, PLC CPU sends PDO.
: The data in PDO remains the same, the PDO here is NOT sent.
Note: You can use the function of setting up the PLC scan time to ensure PLC CPU checks the task of
sending PDO in every set scan time.
Send Quote Requests to info@automatedpt.com
Call +1(800)985-6929 To Order or Order Online At Deltaacdrives.com
Send Quote Requests to info@automatedpt.com
Call +1(800)985-6929 To Order or Order Online At Deltaacdrives.com
To Next Page
Loading...