DFM-400P Rev 2.1 Installation and Appplication Guide Edition 1.6
Page 12 of 14
Programming
Power optimization or load shedding programs or other strategies are typically written in GCL in
various Delta BACnet controllers based on the accumulated pulse values.
MS/TP Connection
Objects
All of the existing predefined DFM-400P objects are readily accessible over the MS/TP
network.
GCL Programming
Write GCL programs in other controllers on the network to use the pulsed input values to
accomplish the desired control strategies, but ensure network traffic is kept to a minimum.
Refer to Appendix "Working with MS/TP and LINKnet"
ORCAview Technical Reference
Manual
for further programming information.
To Next Page
Loading...
Need help?
General
