Need help?Do you have a question about the Delta DVP06XA-S2 and is the answer not in the manual?
Explains the analog input/output module's function and components.
Details the physical layout and terminal connections.
Specifies input ranges, resolution, and impedance for A/D conversion.
Specifies output ranges, resolution, and impedance for D/A conversion.
Details register functions for input/output settings and averaging.
Lists error codes and their meanings for troubleshooting.
Covers communication address, format, and factory reset functions.
Explains LSB values and the module reset procedure.
Explains how to adjust input signal characteristic curves using OFFSET and GAIN.
Explains how to adjust output signal characteristic curves using OFFSET and GAIN.
General| Model | DVP06XA-S2 |
|---|---|
| Category | I/O Systems |
| Analog Input Channels | 4 |
| Analog Output Channels | 2 |
| Input Resolution | 12-bit |
| Output Resolution | 12-bit |
| Analog Input Type | Voltage / Current |
| Analog Output Type | Voltage / Current |
| Current Input Range | 0 ~ 20mA, 4 ~ 20mA |
| Power Supply Voltage | 24V DC |
| Communication Interface | RS-485 |
| Communication Protocol | Modbus RTU |
| Operating Temperature | 0°C ~ 55°C |
| Voltage Input Range | 0-10V |
| Voltage Output Range | 0-10V |
| Current Output Range | 0 ~ 20mA |
| Humidity | 5% ~ 95% (non-condensing) |
To Next Page
