Need help?Do you have a question about the Delta DVP10MC11T and is the answer not in the manual?
General| Model | DVP10MC11T |
|---|---|
| Input Voltage | 24 VDC |
| Digital Inputs | 6 |
| Digital Outputs | 4 |
| Type | Controller |
| Series | DVP Series |
| Analog Inputs | 0 |
| Analog Outputs | 0 |
| Communication Ports | RS-232, RS-485 |
| Programming Software | WPLSoft |
| Operating Temperature | 0°C to 55°C |
| Storage Temperature | -20 to 70 °C |
| Humidity | 5% to 95% (non-condensing) |
| Dimensions | 60mm x 90mm x 60mm |
Details voltage, fuse, consumption, insulation, immunity, ambiance, and weight.
Covers I/O channels, types, terminals, common terminals, input types, delay time, current, cable length, and output load.
Pin definitions and signal details for the RS-232 communication port.
Pin definitions and signal details for the RS-485 communication port.
Interface for CAN bus motion control, including cable and termination recommendations.
9-PIN D-SUB interface for connecting encoders, detailing terminal functions for incremental and voltage encoders.
Details the Ethernet port supporting Modbus/TCP protocol and terminal functions.
Guidelines for installing the unit in an enclosure, emphasizing space for heat dissipation.
Presents simplified models and wiring loops for sink and source input configurations.
Explains connecting suppression circuits for transistor outputs in big-power or frequent On/Off applications.
Describes the status of the Error LED and provides corrective actions for PLC errors and power issues.
Details the status of the CANopen network LED and offers troubleshooting steps for network connectivity and errors.
Explains the status of the Motion Control LED and provides corrective actions for configuration, connectivity, and hardware errors.
To Next Page
