English-3
Inspection
In order to prevent the negligence during purchasing and delivery, please carefully inspect
the items listed below:
Check Item Content
Check if the product is what
you have purchased.
Check the model specified on the controller’s name plate,
referring to Model explanation.
Keys and buttons
Press each key and button, which should feel smooth to
touch.
Appearance
Visually check if there is any damage or scrape in the
product’s appearance.
Connectors Check if there is any loose or un-tightened connector.
If any of the above situations happens, please contact the distributors to solve the
problems.
Servo Drive with NC300 Series Controller
The applicable model of ASDA-A2 and ASDA-M series servo drive is ASD-A2--N,
ASD-A2--NN, ASD-M--F and ASD-A2--F. Please refer to ASDA-A2
and ASDA-M series user manual for further information.
Model Explanation
NC300A - MI - A
(1)
(2)
(3)
(4)
(1) Product Name
NC200: 3-Axis 8-inch CNC controller
NC300: 3-Axis 8-inch CNC controller
NC310: 3-Axis 10-inch Horizontal CNC controller
NC311: 3-Axis 10-inch Vertical CNC controller
(2) Application
M: For milling applications
(3) Type
I: All-in-one type (integrated with both primary and secondary panels)
S: Separated type (secondary panel not integrated)
(4) Version
A: Standard version
AE: English version
To Next Page
Loading...
